Thanks for Stopping By!

Welcome to all visitors and new followers. It is great that you have taken the time to read a post or two. Please visit again and continue to keep it simple and make it real.

Monday, August 19, 2013

From Shirt to Apron - easily

If you have an old big shirt hanging around this is a perfect repurposing for it.  Do a few cuts and add some ties and you have a full coverage apron.  Take a look.

Start with a man's shirt. Cut off the sleeves and the back.

Cut around the collar but leave it intact. Cut very close to the seam so that you won't have to hem anything or have any raw edges.

Use your rotary cutter and ruler to make a diagonal cut from the armpit to the top of the shoulder.

Make sure both sides are even.

On the raw edge that you just cut, turn a hem under, concealing all raw edges, and sew it down. Do this on both sides.

The final step is to make the apron ties. You could use ribbon if you wanted, but I chose to cut strips of fabric on the bias to make the apron interesting.

Close all raw edges in and sew your straps on to the bottom of your diagonal cut. Be sure to backstitch several times for reinforcement.

And you're done!

A couple of final tips-

Flip the collar up until you are completely done with the apron. This keeps you from accidentally stitching it down and it just puts it out of the way!

Second, button the shirt all the way down at the very beginning. This will help your fabric stay straighter.

If you have a plaid shirt, that is a good starter since you can use the stripes as your guide for keeping it straight.

This was found on Facebook posted by Linda

Pretty easy, huh?  Give it a try.

Meanwhile .... keep it simple and make I real.


No comments:

Post a Comment